This is a compact and affordable form measuring instrument.
The Roundtest RA-10 offers you the following benefits:
It combines outstanding cost and performance with full measurement capabilities.
The machine has a compact body with integrated electronics and printer, making it ideal for installation in space-restricted locations.
You can easily view measurement results and recorded profiles on the large coloured LCD panel display.
Despite being a low-priced model, the turntable with air bearings gives you rotational accuracy as high as (0.04+0.0006H) μm, assuring a precision that compares well with that of higher priced models.
The control panel has large keys and an intuitive layout for easy operation.
One-key calling function.
One-key zero-set function.
Support of 16 languages.
It complies with EN ISO standard like 12181-1, 12181-2, 12781-1 and 12781-2.
USB Communication Program – Microsoft® Excel ® based – to import results and create, save and print out inspection certificates on PC.
ROUNDTEST RA-120
Series 211 - Form Measuring Instrument
This is a compact roundness tester with D.A.T. (Digital Adjustment Table) function.
The D.A.T. gives you the following benefits:
The turntable displays centering and leveling adjustments digitally, making this challenging task easy enough for even an untrained operator to perform, through these four simple steps:
1. Preliminary measurement of two cross sections on the workpiece.
2. The centering and leveling adjustment values are displayed.
3. The digital micrometer heads on the rotary table are adjusted to match the values displayed.
4. Centering and leveling is complete. [Centering range : ±3 mm - Leveling range : ±1°]
ROUNDTEST RA-120P
This is a compact roundness tester with D.A.T. (Digital Adjustment Table) function.
The D.A.T. gives you the following benefits:
The turntable displays centering and leveling adjustments digitally, making this challenging task easy enough for even an untrained operator to perform, through these four simple steps:
1. Preliminary measurement of two cross sections on the workpiece.
2. The centering and leveling adjustment values are displayed.
3. The digital micrometer heads on the rotary table are adjusted to match the values displayed.
4. Centering and leveling is complete. [Centering range : ±3 mm - Leveling range : ±1°]
